Maritime Half Hull Ship Models and Nautical Art
This topic
This board
Entire forum
Google
Welcome,
Guest
. Please
login
or
register
.
Did you miss your
activation email
?
1 Hour
1 Day
1 Week
1 Month
Forever
Login with username, password and session length
Forum News:
Be sure and check out our Featured Articles below
Home
Forum
Help
TinyPortal
Search
Login
Register
Maritime Half Hull Ship Models and Nautical Art
»
Forum
»
Modeling and Fabrication of HalfHulls and Ship Models
»
Sailing Vessels
»
The Sagres
Featured Articles
Half-Hull Construction step by step
Building HalfHulls
Static Models
« previous
next »
Print
Pages: [
1
]
Go Down
Author
Topic: The Sagres (Read 1139 times)
November 10, 2007, 09:48:39 PM
Member
Jr. Member
Posts: 90
The Sagres
S.T.S. Sagres
The Albert Leo Schlageter, now the Portuguese Navy school ship Sagres (III) , is a three-masted tall ship launched on 30 October 1937 at Blohm & Voss in Hamburg for the German navy (Kriegsmarine) as a training vessel for cadets, sistership of the Gorch Fock, the Horst Wessel, and the Romanian training vessel Mircea. Another sister, Herbert Norkus, was not completed. The ship was named after a Nazi hero, Albert Leo Schlageter, who was executed by French forces occupying the Ruhr for acts of sabotage.
The ship is a steel-built three masted barque, with square sails on the fore and main masts and gaff rigging on the mizzen mast. Her main mast rises 42 m above the deck. She carries 22 sails totalling about 2,000 m² (21,000 ft²) and can reach a top speed of 17 knots (31 km/h) under sail. She has a sparred length of 89 m (295 ft), a width of 12 m (40 ft), a draught of 5.2 m (17 ft), and a displacement at full load of 1,755 tons.
Following a number of international training voyages, the ship was used as a stationary office ship after the outbreak of World War II and was only put into ocean-going service again in 1944 in the Baltic Sea. On 14 November 1944 she hit a Soviet mine off Sassnitz and had to be towed to port in Swinemünde. Eventually transferred to Flensburg, she was taken over there by the Allies when the war ended and finally confiscated by the United States.
In 1948, the US sold her to Brazil, where she sailed as a school ship for the Brazilian Navy under the name Guanabara. In 1961, the Portuguese Navy bought her to replace the old school ship Sagres (II) (which was transferred to Hamburg, where she is a museum ship under her original name Rickmer Rickmers). The Portuguese Navy renamed her Sagres (the third ship of that name), and she is still in service.
Sagres II (Gorch Fock class) sail training ship
Displacement: 1,784 tons full load
Dimensions: 90 x 11.9 x 5.2 meters (295 x 39 x 17 feet)
Propulsion: Sail, 18 knots; 2 diesels, 1 shaft, 750 bhp, 10.5 knots
Crew: 162 + cadets
Former German sail training ship, to US post WWII, then to
Brazil, then to Portugal.
Number Name Year Homeport Notes
(A520) Sagres II 1938/62 Ex-Guanabara
Night time on deck
«
Last Edit: November 11, 2007, 05:13:43 PM by oliveira
»
Logged
Print
Pages: [
1
]
Go Up
« previous
next »
Maritime Half Hull Ship Models and Nautical Art
»
Forum
»
Modeling and Fabrication of HalfHulls and Ship Models
»
Sailing Vessels
»
The Sagres
Items of Interest